Name: Equipamiento de Andén
Availability: InStock

Dock Levelers

Bridge the height and distance between the warehouse floor and truck bed, creating a safe, continuous travel surface for forklifts.

Dock Doors

Serve as the primary barrier to outdoor conditions and minimize cold-air loss.

Dock Seals and Shelters

Designed to provide maximum dock protection, Alapont shelters offer strong weather resistance, adapt to different truck and cargo types, limit the passage of air, water, and gases, and deliver substantial energy savings. Their materials resist moisture, abrasion, and aging caused by solar radiation.

I. Side pads: Essential for maintaining optimal temperatures in loading and unloading areas. Truck movement can displace dock-shelter curtains and allow air infiltration. Foam pads covered with rigid fabric fit the shelter corners closely, blocking airflow and reducing thermal losses.

II. Alapont inflatable dock shelter: Recommended where indoor and outdoor temperature differences are significant. It provides effective protection from cold, wind, and heat.

Hinged Cold-Room Doors

Alapont Global hinged refrigeration doors are designed for temperature-controlled environments, including chilled rooms (+0 °C) and freezer rooms (-20 °C).

They are an optimal solution for supermarkets, hotels, restaurants, and industrial applications, providing reliable and safe performance.

Multiple opening options are available to match operating needs: pull, push, or handle rotation, improving convenience and efficiency in every use.

Puerta blanca con marco y pestillo metálico sobre fondo blanco.

Puerta blanca metálica con marco abierta vista lateral con manilla gris.

Hygienic Door-Leaf Design

• Folded steel sheet construction requires no perimeter molding or welding. Its double-folded side finish improves mechanical strength and cleanability, while the leaf fits semi-recessed into the frame.

• A more efficient thermal system reduces gasket exposure to cold air: only 5 mm around the upper and side perimeter, compared with 20 mm on an overlay design.

• A cleaner appearance keeps the same 50 mm projecting leaf thickness across both chilled and freezer doors.

Telescopic Frame with Front Thermal Break

• Innovative telescopic frame and counterframe system (±40 mm) adapts wall fastening to insulated panels or masonry from 60 to 100 mm thick; manufactured from 20-micron anodized aluminum.

• Double FRONT thermal break for improved efficiency.

• Frame installation only requires cutting the panel to the clear opening plus 3 cm around the perimeter, compared with the market-standard 5 cm.

Puerta blanca metálica para cámara frigorífica con manilla plateada y marco expuesto.

Frame Adaptation

Adaptable fastening system for insulated-panel or masonry walls.

• Maximum width: 100 mm

• Minimum width: 60 mm

Diagrama técnico de puerta pivotante con medidas de perfiles y espacios en centímetros.

S7000 Lock

• Made from PA6 polyamide thermoplastic with high hardness, rigidity, wear and abrasion resistance, and a low coefficient of friction.

• Ideal for low-friction and mechanical parts exposed to elevated temperatures; resistant to hydrocarbons and solvents.

• Continuous unloaded operating temperature: -40 to +100 °C. Includes an interior anti-panic safety handle for personnel trapped inside.

• Multipurpose lock with dual PRESSURE or IMPACT closing function. Key included.

Cerradura moderna con llave insertada en puerta blanca con diseño de manilla curvada.

Frame with Injection Ports

Allows the frame to be installed first and injected through the ports afterward for a practical, robust, clean, and thermally efficient result.

Hardware Installation

Secure fastening. The leaf includes threaded inserts for mounting hinges and the lock, simplifying installation and replacement.

Energy Efficiency

Lower energy consumption with no moisture or condensation.

Hinges and Gaskets

3D-adjustable zinc hinges in gray, with a maximum opening angle of 180° and a hold-open position at 120°.

Gasket: perimeter seal.

Semiconductor Heating Element (LT)

Dynamic, low-energy heating that is self-regulating (PTC) and temperature-limiting.

Opening Directions

Hinged Refrigeration Door

Puertas abatibles con marco rectangular y manijas verticales en un acabado oscuro.

Hinged Refrigeration Door

Diagrama de un mecanismo pivotante con piezas numeradas y líneas de movimiento indicadas.

Additional Features

Hinged Door

Dibujo técnico de una puerta pivotante con marco, hoja y manija señaladas.

Advantages

Pre-installed door for fast, easy installation.

High-strength mechanical hinges adjustable in three directions.

High durability and resistance to intensive use.

Corrosion resistance, even in aggressive environments, depending on the finish.

Energy efficiency

Adaptable to project requirements

Optimal functional, climatic, hygienic, and sanitary performance

Low maintenance

Door Leaf

Overlay-mounted on the frame. Built with an anodized-aluminum outer frame and a PUR foam core with a nominal density of 40–45 kg/m³. The leaf includes a dual-hardness extruded PVC double gasket for an airtight seal.

Door Kits

This model supplies every disassembled component for a modular sliding refrigeration door without the panel, simplifying handling and transport for assembly at the destination.
Designed for a smooth 100 mm / 4 in insulated sandwich panel to complete the leaf. Suitable for temperatures from +0 °C to -20 °C.
Components support either left- or right-hand opening.

Industrial Sliding Refrigeration Door

Kavidoors sliding refrigeration doors are specifically designed for chilled rooms (+0 °C), freezer rooms (-20 °C), and blast-freezing tunnels (-40 °C). They are ideal for temperature-controlled environments in meat, seafood, and other industries.

The door includes Kavidoors' patented anti-drop and anti-tip safety system.

Frame

Self-supporting refrigeration frame built from L-shaped extruded aluminum profiles with a polished silver 20-micron anodized finish and an optional white coating. The profile includes a double thermal break and aluminum counterframes that adjust to any insulated-panel thickness.

Optional Features

Custom-sized leaf

Automation

Hood system for overhead-rail passage

Anodized counterframes

Pull handle

Double-glazed ISO viewing window for chilled doors (+0 °C)

Stainless steel / checker plate / PE protective panel

Lock for manual or automatic doors

Two-leaf door available

Kit-supply option

Hydraulic or Mechanical Edge-of-Dock Leveler

Ideal application
Loading and unloading in confined spaces where a conventional dock leveler cannot be installed.

This is an effective option for handling goods in restricted areas where a conventional dock leveler is impractical. It requires no pit and mounts directly at the dock platform edge, eliminating major civil work and reducing cost and production disruption.